基于地表水源热泵尾水排放的江河热环境容量研究

运用FLUENT软件对重庆市洪崖洞水源热泵系统尾水排入受纳水域的过程进行二维数值模拟,选取FLUENT中非耦合、隐式求解器对模型内的定常流动进行求解,得出受纳水域受水源热泵系统温排水影响后的温度梯度和温升面积。在温排水流量为4 500 m3/h、温差为6℃的条件下,得出受纳水域温升值超过1℃的水域面积约为1 600 m2,为模拟江河水域面积的2.0%。选取1℃温升值作为温升带边界控制值,在热泵系统最大负荷工况下,计算得出受纳水域的热环境容量为312.5(m.3℃)/s,剩余热环境容量为306.25(m.3℃)/s。根据地表水环境质量标准,该工程温排水量小于受纳水域的热承载力,不会对受纳水域生态环境造成热污染。     

调水工程生态补偿的分阶段推进战略

水质安全是调水工程顺利实施的关键,为此调水区背负巨大的调水工程的外部经济成本和社会发展代价,必须通过生态补偿政策进行内部化,然而调水工程涉及的范围广、时间长、利益主体多、资金投入大,难以通过一种手段或者现有某种方式建立长效的生态补偿机制。文章从调水工程生态补偿政策建立的目标、标准、责任分担与利益共享、补偿方式角度分析了生态补偿现状及存在的问题,提出了调水工程生态补偿的分阶段推进战略总体思路与实施构想,重点分析了各阶段生态补偿政策的制定标准和要求,为中线调水工程生态补偿政策制定提供了技术支持。     

Shellac-coated iron oxide nanoparticles for removal of cadmium(II) ions from aqueous solution

This study describes a new effective adsorbent for cadmium removal from aqueous solution synthesized by coating a shellac layer, a natural biodegradable and renewable resin with abundant hydroxyl and carboxylic groups, on the surface of iron oxide magnetic nanoparticles. Transmission Electron Microscopy (TEM) imaging showed shellac-coated magnetic nanoparticle (SCMN) adsorbents had a core-shell structure with a core of 20 nm and shell of 5 nm. Fourier Transform Infrared Spectroscopic analysis suggested the occurrence of reaction between carboxyl groups on the SCMN adsorbent surface and cadmium ions in aqueous solution. Kinetic data were well described by pseudo second-order model and adsorption isotherms were fitted with both Langmuir and Freundlich models with maximum adsorption capacity of 18.80 mg/g. SCMN adsorbents provided a favorable adsorption capacity under high salinity conditions, and cadmium could easily be desorbed using mild organic acid solutions at low concentration.     

Surface clogging process modeling of suspended solids during urban stormwater aquifer recharge

Aquifer recharge,which uses urban stormwater,is an effective technique to control the negative effects of groundwater overexploitation,while clogging problems in infiltration systems remain the key restricting factor in broadening its practice.Quantitative understanding of the clogging process is still very poor.A laboratory study was conducted to understand surface physical clogging processes,with the primary aim of developing a model for predicting suspended solid clogging processes before aquifer recharge projects start.The experiments investigated the clogging characteristics of different suspended solid sizes in recharge water by using a series of one-dimensional fine quartz sand columns.The results showed that the smaller the suspended particles in recharge water,the farther the distance of movement and the larger the scope of clogging in porous media.Clogging extents in fine sand were 1 cm,for suspended particle size ranging from 0.075 to 0.0385 mm,and 2 cm,for particles less than 0.0385 mm.In addition,clogging development occurred more rapidly for smaller suspended solid particles.It took 48,42,and 36 hr respectively,for large-,medium-,and small-sized particles to reach pre-determined clogging standards.An empirical formula and iteration model for the surface clogging evolution process were derived.The verification results obtained from stormwater recharge into fine sand demonstrated that the model could reflect the real laws of the surface clogging process.     

Ultrafine particle emission characteristics of diesel engine by on-board and test bench measurement

This study investigated the emission characteristics of ultrafine particles based on test bench and on-board measurements. The bench test results showed the ultrafine particle number concentration of the diesel engine to be in the range of (0.56-8.35) × 10⁸ cm^-3. The on-board measurement results illustrated that the ultrafine particles were strongly correlated with changes in real-world driving cycles. The particle number concentration was down to 2.0 × 10⁶ cm^-3 and 2.7 × 10⁷ cm^-3 under decelerating and idling operations and as high as 5.0 × 10⁸ cm^-3 under accelerating operation. It was also indicated that the particle number measured by the two methods increased with the growth of engine load at each engine speed in both cases. The particle number presented a "U" shaped distribution with changing speed at high engine load conditions, which implies that the particle number will reach its lowest level at medium engine speeds. The particle sizes of both measurements showed single mode distributions. The peak of particle size was located at about 50-80 nm in the accumulation mode particle range. Nucleation mode particles will significantly increase at low engine load operations like idling and decelerating caused by the high concentration of unburned organic compounds.     

Identification of rice cultivars with low brown rice mixed cadmium and lead contents and their interactions with the micronutrients iron, zinc, nickel and manganese

Paddy fields in mining areas are usually co-contaminated by a cocktail of mixed toxic heavy metals (e.g., Cd and Pb in Pb/Zn mines). However, previous studies on rice cultivars screened for effective metal exclusion have mostly focused on individual metals, and have been conducted under pot-trial or hydroponic solution conditions. This study identified rice cultivars with both low Cd and Pb accumulation under Cd-and Pb-contaminated field conditions, and the interactions of the toxic elements Cd and Pb with the micronutrient elements Fe, Zn, Mn and Ni were also studied. Among 32 rice cultivars tested, there were significant differences in Cd (0.06-0.59 mg/kg) and Pb (0.25-3.15 mg/kg) levels in their brown rice, and similar results were also found for the micronutrient elements. Significant decreases in concentrations of Fe and Mn were detected with increasing Cd concentrations and a significant elevation in Fe, Mn and Ni with increasing Pb concentrations. A similar result was also shown by Cd and Ni. Three cultivars were identified with a combination of low brown rice Cd and Pb, high micronutrient and grain yield (Wufengyou 2168, Tianyou 196 and Guinongzhan). Present results suggest that it is possible to breed rice cultivars with low mixed toxic element (Cd, Pb) and high micronutrient contents along with high grain yields, thus ensuring food safety and quality.     

基于析因设计的多种重金属对发光菌联合毒性研究

文章采用析因设计的方法,研究沉积物水浸提液掺杂的多种重金属Cu、Cd、Zn、Pb和Ni对发光菌的联合毒性。通过对试验结果进行方差分析和多元线性回归,建立了重金属浓度和发光菌发光抑制率的关系模型:T=97.983Cu+41.111Cd-27.297Zn+129.869Pb+16.715Ni-5 803.639Cu*Cd+2 270.182Cd*Zn-6 411.870Cd*Pb-675.052Cd*Ni-3 108.544Pb*Ni+15 9552.434Cd*Pb*Ni+274 718.434Zn*Pb*Ni。模型分析结果表明:Zn对联合毒性产生负的影响,Cu、Cd、Pb、Ni对联合毒性具有正的贡献;Cd*Zn二元交互作用和Cd*Pb*Ni、Zn*Pb*Ni三元交互作用表现为协同作用,Cu*Cd、Cd*Pb、Cd*Ni、Pb*Ni二元交互作用表现为拮抗作用,而重金属四元和五元交互作用对联合毒性的贡献不显著。上述重金属联合毒性的作用可为沉积物中重金属复合污染控制提供参考。     

有机氯农药污染土壤的Fenton氧化修复研究

研究了Fenton氧化对某实际有机氯农药污染场地土壤的修复效果。结果显示:Fenton氧化能够快速有效地降解污染土壤中的六氯和DDTs。当Fe2+浓度为80 mmol/L,Fe2+与H2O2的摩尔浓度比为1∶5,水土比10∶1时,反应6 h,土壤中六氯和总DDT的去除率分别为:96.7%和78.2%。每方土的修复成本估算为951元。     

微生物和酶在降解环境有机污染物中的应用

介绍了生物修复有机污染的土壤和水体的研究进展,对微生物和酶处理的技术进行了详细讨论。降解有机物的微生物以白腐真菌为代表,可有效降解多环芳烃;降解有机物的酶以过氧化物酶和水解酶为代表,分别能够降解芳香族化合物和有机农药。     

隔离式减振垫浮置板道床施工工艺的探讨

介绍隔离式减振垫浮置板道床施工工艺、基本原理、施工特点、施工设备和作业人员配备。针对浮置板道床高度及构成、轨道基础施工、隔振垫铺设施工、轨排铺设施工、隔离式减振垫道床钢筋及混凝土施工、伸缩缝的设置、密封条及防水层施工进行分析和论述,提出安全质量控制措施。